CDTDP - PLASTIC PACK RESIN (COMPONENT A)

  • MSDS: CDTDP
  • Manufacturer: MICOR CO INC
  • Product Name: PLASTIC PACK RESIN (COMPONENT A)
  • National Stock Number: 8040-00N039393
Product Identification

Product ID:PLASTIC PACK RESIN (COMPONENT A)
MSDS Date:01/22/1990
FSC:8040
NIIN:00N039393
Kit Part:Y
MSDS Number: CDTDP

Responsible Party
MICOR CO INC
3232 NORTH 31ST ST
MILWAUKEE, WI 53216
US

Emergency Phone: 414-873-2071;800-424-9300(CHEMTREC)

Info Phone: 414-873-2071

Preparer: WILLIAM R BINNEY

Cage: MICRC

Contractor
MICOR CO INC
MILWAUKEE, WI 53216 US

Telephone: 414-873-2071

Cage: MICRC

Ingredients

EPOXY RESIN

OSHA PEL 50 PPM (MFR)

ACGIH TLV: 25 PPM (MFR)


PROPANE, 1-BUTOXY-2,3-EPOXY-; (EPOXY RESIN)

CAS: 2426-08-6

RTECS: TX4200000

OSHA PEL 50 PPM

ACGIH TLV: 25 PPM


1); (CALCIUM CARBONATE)

CAS: 471-34-1

RTECS: FF9335000

OSHA PEL 5 MG/M3 (MFR)

ACGIH TLV: 5 MG/M3 (MFR)


1); (CALCIUM CARBONATE)

CAS: 471-34-1

RTECS: FF9335000

OSHA PEL 15 MG/M3 TOTAL DUST

ACGIH TLV: 10 MG/M3 (MFR)


SILICA, CRYSTALLINE - QUARTZ

CAS: 14808-60-7

RTECS: VV7330000

OSHA PEL SEE TABLE Z-3

ACGIH TLV: 0.1 MG/M3 RDUST

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ACUTE:INHALATION:NASAL IRRITATION,
CENTRAL NERVOUS SYSTEM DEPRESSION, LUNG INJURY. EYE:CAN CAUSE
MODERATE IRRITATION. SKIN:MILD TO MODERATE IRRITATION. MAY BE SKIN
SENSITIZER. SKIN ABSORPTION:MAY BE A BSORBED THRU SKIN TO PRODUCE
EFFECTS ONCENTRAL NERVOUS SYSTEM. INGESTION:HARMFUL IF SWALLOWED.
Explanation of Carcinogenicity:SILICA, CRYSTALLINE-QUARTZ:IARC
MONOGRAPHS, SUPP. VOL 7, PG 341, 1987:GROUP 2A. NTP 7TH ANNUAL RPT
ON CARCINS, (SUPDAT)
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:RESPIRATORY DISEASE. ALSO, PERSONS
WITH CERTAIN TYPES OF NEUROLOGICAL DISORDERS, SUCH AS MULTIPLE
SCLEROSIS, SHOULD CONSULT A PHYSICIAN PRIOR TO EXPSOURE.

First Aid

First Aid:EYES:FLUSH THOROUGHLY W/WATER FOR @ LST 15 MINS & GET MED
ATTN. CONT LENSES SHOULD NOT BE WORN WHEN USING THIS PROD.
SKIN:REMOVE CONTAMD CLTHG. FLUSH W/WATER & THEN WASH W/SOAP &
WATER. REMOVE & DISCA RD CONTAMD SHOES. INGEST:CONSULT PHYS BEFORE
TAKING ANY ACTION. INHAL:REMOVE TO UNCONTAMD AREA. KEEP AFFECTED
PERSON WARM & AT REST & GET PROMPT MED ATTN.

Fire Fighting

Flash Point:157F,69C
Extinguishing Media:FOAM, CO*2, DRY CHEMICAL OR FOG.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE.

Accidental Release

Spill Release Procedures:VENTILATE AREA. SOAK UP IN SUITABLE ABSORB
MATL. FOR LG SPILLS, DIKE AREA & PUMP INTO CLSD CNTNRS. PVNT THIS
MATL FROM ENTERING WATERWAYS. DO NOT FLUSH TO SEWER. SCOOP UP
CONTAMD SOIL & PLACE IN DRY D RUMS. AVOID SKIN CONT & BRTHG OF
FUMES.(SUPDAT)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:THIS MATERIAL MAY CAUSE SENSITIZATION.
DO NOT GET IN EYES, SKIN OR CLOTHING. DO NOT ALLOW CONTAMINATED
CLOTHING TO CONTACT SKIN.
Other Precautions:AVOID CONTACT WITH VAPORS OR FUMES. STORE IN COOL,
DRY PLACE.

Exposure Controls

Respiratory Protection:NIOSH APPROVED VAPOR RESPIRATOR TO AVOID
BREATHING SPRAY MIST, OR HEATED VAPORS.
Ventilation:LOCAL EXHAUST:REQUIRED. MECHANICAL:REQUIRED.
Protective Gloves:CHEMICAL RESIST RUBBER/PLASTIC GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPRVD EYE WASH & DELUGE SHOWER . AS
REQUIRED TO PREVENT WETTING SKIN OR CLOTHING.
Work Hygienic Practices:WASH HANDS THOROUGHLY BEFORE EATING, SMKNG
APPLYING COSMETICS, ETC. THOROUGHLY LAUNDER WORK CLTHG BEFORE
REUSE.
Supplemental Safety and Health
MATLS TO AVOID:BE DONE ONLY UNDER SUPERVISION OF QUALIFIED INDIVIDUALS.
EXPLAN OF CARCIN. 1994:ANTIC TO BE CARCIN. SPILL PROC:WEAR PROT
EQUIP DURING CLEANUP.

Chemical Properties

Spec Gravity:1.13
Evaporation Rate & Reference:NONVOLATILE
Solubility in Water:INSOLUBLE
Appearance and Odor:LIGHT BROWN, MILD ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS/BASES, STRONG OXIDIZERS & EPOXY HARDENERS UNDER
UNCONTROLLED CNDNTS. MIXING W/OTHER CHEMS SHOULD (SUPDAT)
Stability Condition to Avoid:EXCESS HEAT & CONTACT WITH STRONG
ACIDS/BASES.
Hazardous Decomposition Products:CARBON MONOXIDE, CO*2, SMOKE,
TITANIUM.

Disposal

Waste Disposal Methods:BURN IN ADEQUATE INCINERATOR OR BURY IN
LANDFILL. OBSERVE ALL STATE, FEDERAL AND LOCAL ORDINANCES.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.